hello@poet.co +1-954-956-7681

Three Axis Tracking Performer Flying System

Three Axis Tracking Performer Flying System. Movement along pre-defined curving or straight track path. Track length and path is pre-determined from event design. Motor features unlimited 360 degree operator controlled motorized rotation. The three axis tracking performer flying system is available in 3-phase 240v or 400v. The system lifts 250 pounds 40 vertical feet at a speed of 120 feet per minute. Tracking speed via the drive tractor is 120 feet per minute. Long frame models are also available for tight fly loft applications.

PTS performer flying systems feature frame enclosures, motor and redundant braking systems, drive fault load sensing, travel limits, and programmed acceleration / deceleration ramping.

Performance applications include tracking flights over the audience, across the stage or any application where the performer needs to be lifted and then tracked in a straight line. Typical uses are for singers or presenters that require facing in a specific direction while traveling along the track during their performance/ presentation. Speed ramping of both the drive tractor and the lifting motors enable the operator to fly in smooth natural-looking flights.

Some sample theatrical performance uses might include:

  • Singers
  • Corporate presentations
  • Product reveals
  • Aerial Actors
  • Prop flights

Winch Specifications

  • Lift Speed: 120 feet per minute
  • Lift Height: 40 feet
  • Lift WLL: 250 lbs
  • Tracking Speed: 120 feet per minute
  • Tracking Distance: Open – Determined by track length
  • Voltage: 240v or 400v, 3 phase
  • Connector: 100’ extension cable, Camloc ends

3 Channel (Travel, Lift, Rotate), variable speed, dual joystick with thumb switch rotate, E-Stop, key lock


  • Single Stage Limit Switches
  • Electric Fault Load Sensing
  • Redundant Safety Brake


  • 1 of either Model PTS-TR360-120-250-240v, PTS-TR360-120-250-240vLF, or PTS-TR360-120-250-400v – 360 degree motorized rotate tracking winch with drive tractor
  • 3-Channel Dual Joystick Controller with thumb switch rotate
  • 100’ Control Cable
  • 100’ Power Cable (Camloc Ends)

Rigging Kit

  • Does NOT include track – track price is quoted after determining the amount of track needed for the event
  • 1/8”- black GAC cable and swaging hardware
  • Sheaves and sheave truss/steel attachments
  • Tracking Trolley
  • Festoon Trolleys


  • Does not include ceiling rigging hoists and venue ceiling attachment or stiffening hardware. (This can be provided for an additional cost.)
  • Requires ballast or building anchors for both winch and truss stiffening.
  • Freight not included.

Total freight depends on the system specified for your production. Contact us to discuss your needs and that point we can determine the shipping requirements.

Scroll to Top