hello@poet.co +1-954-956-7681

120 ft/min Single Line Performer Flying System

Single Lift Line 120 foot per minute (3 feet per second) performer flying system with single joystick control. Ceiling Sheaves mount to venue supplied truss or venue steel. Poet Technical Services 120 foot per minute motors are available in 3 different configurations: long frame yoyo (for small space installations with fleet angle issues), low profile drum, and mini-frame yoyo. Each of these motors feature 40 feet of lift, 120 feet per minute lift speed, and 400 lb working load limits.

PTS performer flying systems feature frame enclosures, both motor and redundant braking systems, drive shaft over speed monitoring, active line load sensing, drive fault load sensing, dual limits, and programmed acceleration / deceleration ramping.

With the 400 pound lifting rating, this winch can be used for both single and multi-line acrobatic and other performance-related lifting applications. Acrobatic performance applications are limited to the maximum speed of 3 feet per second of lift. For other types of acrobatic applications that require faster lift speeds, we also have single line lifts at 4 feet per second and 10 feet per second.

In single line applications, example theatrical and acrobatic performance uses include:

  • Aerial Silks
  • Duo Aerial Silks
  • Harness Flying
  • Acrobatic Rope (Corde Lisse)
  • Lira (Cerceaux)
  • Prop flights

In multi-line applications, the system uses a clew to separate into 2 or 4 separate lift lines. Example theatrical applications include:

  • Solo Trapeze (two lines and one aerial performer)
  • Duo Trapeze (two lines and two aerial performers)
  • Aerial Prop Lift (single line or multiple lines)
  • Non-rotating angel flight (vertical lift over the stage with the performer facing towards the audience with no rotation capability)

Winch Specifications

  • Lift Speed: 120 feet per minute
  • Lift Height: 40 feet
  • Lift WLL: 400 lbs
  • Voltage: 400v or 240v, 3 phase
  • Connector: 100’ extension cable, Camloc ends

Control

1 Channel, variable speed, single joystick, with E-Stop, key lock

Safety

  • Two Stage Limit Switches
  • Active Line Load Sensing
  • Electric Fault Load Sensing
  • Over speed Sensors
  • Redundant Safety Brake

Winch

  • 1 of either Model PTS-BFSLY-120-400-400v (400v Mini Frame Single Lift Line Yoyo), Model PTS-LPSL-120-400-240v (Low Profile Single Lift Line Drum), or Model PTS-LFSLY-120-400-240v (Long Frame Single Lift Line Yoyo), Performer Flying Winch
  • Single Joystick Controller
  • 100’ Control Cable
  • 100’ Power Cable (Camloc Ends)

Rigging Kit

  • Truss attachment hardware
  • 1/4”- black GAC cable and swaging hardware
  • Sheaves and sheave truss/ steel attachments

Notes

  • Does not include ceiling rigging hoists and venue ceiling attachment or stiffening hardware. (This can be provided for an additional cost.)
  • Requires ballast or building anchors for both winch and truss stiffening.
  • Freight not included.

Total freight consists of one 48” x 48” pallet for the motor and one ATA road case on wheels. The rigging kit (truss attachment hardware, sheaves, cable and swaging tools) and motor power cable, motor control cable and joystick controller ships in the one ATA road case.

Case Dimensions

Motor Pallet 30”H x 48”W x 48”L • Weight 350 lbs

Roto Case 24”H x 24”W x 48”L • Weight 300 lbs

z
Scroll to Top